The heating element of an electric heater should be made with a material which should have
Physics · JEE Main · NTA Exams — Current Electricity
The heating element of an electric heater should be made with a material which should have
- High specific resistance and high melting point
- High specific resistance and low melting point
- Low specific resistance and high melting point
- Low specific resistance and low melting point
Answer
(A) High specific resistance and high melting point
Sign up free on Edukali to view the step-by-step worked solution and practice thousands of similar questions.
Related practice questions
- Two wires of the same dimensions but resistivities ρ 1 and ρ 2 are connected in series. The equivalent…
- Find out the value of current through 2Ω resistance for the given circuit.
- A coil has resistance of 18 Ω when its mean temperature is 20 o C and of 20 Ω when its mean temperature is 50…
- In the figure shown below, the electric current flowing through 2R resistor is
- A nichrome wire 1 m long and 1 mm 2 in cross-section area draws 4 A current at 2 volt. The resistivity of…
- A set of 'n' equal resistors, of values, 'R' each, are connected in series to a battery of emf 'E' and…
- A galvanometer of coil resistance 20Ω gives a full scale deflection with a current of 5 mA. What arrangement…
- The electric resistance of a certain wire of iron is R. If its length and radius are both doubled, then:
More Current Electricity questions · Browse all practice questions