When a voltage measuring device is connected to ac mains, the meter shows the steady…

Physics · Class 12 · CBSE — Alternating Current

1. input voltage cannot be ac voltage, but a dc voltage.
2. maximum input voltage is 220 V.
3. the meter reads not V but <V²> and is calibrated to read \(\sqrt{} .\)
4. the pointer of the meter is stuck by some mechanical defect.

Answer

(C) the meter reads not V but V 2 > and is calibrated to read .

Sign up free on Edukali to view the step-by-step worked solution and practice thousands of similar questions.

Related practice questions

• In a series LCR circuit having L = 30 mH, R = 8 Ω and the resonant frequency is 50 Hz. The quality factor of…
• An inductor of 30 mH is connected to a 220 V, 100 Hz ac source. The inductive reactance is
• As the frequency of an ac circuit increases, the current first increases and then decreases. What combination…
• A series resonant LCR circuit has a quality factor ( Q -factor) 0.4. If R = 2 k , C = 0.1 F , then the value…
• A capacitor of capacitance C has reactance X in an ac circuit. If the capacitance and the frequency of the…
• When the plane of the armature of an a.c. generator is parallel to the field, in which it is rotating
• The voltage across a pure inductor is represented in the figure. Which one of the following curves in the…
• Which of the following graphs represents the correct variation of inductive reactance X L with frequency υ?

More Alternating Current questions · Browse all practice questions